Rowland Technologies

Physical	Test Method	Units	Typical Values
Specific Gravity	D-792	---	1.20
Water Absorption	D-570	%	0.32 equilibrium
Rockwell Hardness	D-785	(R Scale)	118
Pencil Hardness	D-3363	Scratch Hardness	B
Coefficient of Thermal Expansion	D-696	in/in/ºF	38 x 10-6

Optical	Test Method	Units	Typical Values
Light Transmission	D-1003	%	88-91
Refractive Index	D-542	N_D	1.586

Mechanical	Test Method	Units	Typical Values
Tensile Strength Yield	D-882	psi	8,700
Tensile Strength Break	D-882	psi	10,500
Elongation	D-882	%	150
Tensile Modulus	D-882	psi	350,000

Thermal	Test Method	Units	Typical Values
Tensile Heat Distortion	D-1637	ºF	302º @ 50 psi
Deflection Temperature	D-648	ºF	288º @ 264 psi
Vicat Softening Temperature	D-1525	ºF	305-315

Average Properties of Rowlux® Illusion Film PETG

Physical	Test Method	Units	Typical Values
Specific Gravity	D-792	---	1.20
Thermal Conductivity	D-177	Btu•in/h•ft2•ºF	1.50
Coefficient of Thermal Expansion	D-696	mm/mm/ºC	5.1x10^-5

Mechanical	Test Method	Units	Typical Values
Tensile Strength Yield	D-882	psi	8,700
Tensile Strength Break	D-882	psi	10,500
Elongation at break	D-882	%	400
Tensile Modulus of Elasticity	D-882	10⁵ psi	2.80

Thermal	Test Method	Units	Typical Values
Deflection Temperature	D-648	ºF @ 264 psi	147
Vicat Softening Temperature	D-1521	ºF	185

PLEASE NOTE: Properties reported here are typical of average lots. Rowland Technologies, Inc. makes no representation that the material in any particular shipment will conform exactly to the value given herein nor is Rowland Technologies, Inc. responsible for the performance of this material for a given application. The user of the material should perform their own testing to determine the suitability of the material for the intended use. Applications depicted herein are not specifications. They are provided as information only.

Rowlux Illustion Film Product Description

Extruders of Plastic Film and Sheet